LM67048/LM67010 Tapered Roller Bearings
LM67048/LM67010 sizes 31,75x59,13x15,88 is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
LM67048/LM67010 Timken
4T-LM67048/LM67010 Tapered roller bearing, pressed steel cage NTN
LM 67048/010 SKF Explorer Tapered roller bearings, single row SKF
Tapered Roller Bearings - TS (Tapered Single) Imperial > M67048/ LM67010 KOYO
Specifications-- 4T-LM67048/LM67010 Tapered roller bearing, pressed steel cage
Series LM67000
Cone Part Number LM67048
Cup Part Number LM67010
Design Units Imperial
Bearing Weight 0.4 lb
Cage Type Stamped Steel
Dimensions
d - Bore 1.2500 in
D - Cup Outer Diameter 2.3280 in
B - Cone Width 0.6600 in
C - Cup Width 0.4650 in
T - Bearing Width 0.6250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius1 0.14 in
r - Cup Backface "To Clear" Radius2 0.050 in
da - Cone Frontface Backing Diameter 1.42 in
db - Cone Backface Backing Diameter 1.67 in
Da - Cup Frontface Backing Diameter 2.24 in
Db - Cup Backface Backing Diameter 2.05 in
Ab - Cage-Cone Frontface Clearance 0.05 in
Aa - Cage-Cone Backface Clearance 0.01 in
a - Effective Center Location3 -0.12 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)4 2720 lbf / 12100 N
C1 - Dynamic Radial Rating (1 million revolutions)5 10500 lbf / 46700 N
C0 - Static Radial Rating 10000 lbf / 44600 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 1920 lbf / 8550 N
Factors
K - Factor7 1.42
e - ISO Factor8 0.41
Y - ISO Factor9 、1.46
G1 - Heat Generation Factor (Roller-Raceway) 12.8
G2 - Heat Generation Factor (Rib-Roller End) 9.93
Cg - Geometry Factor10 0.0612
LM67048/LM67010 Timken
d 31.75 mm
D 59.13 mm
B 16.76 mm
C 11.81 mm
T 15.88 mm
d1 45.5 mm
a 13.08 mm
e 0.41
Y2 1.46
Y0 0.8
Mass 0.18 kg
Brand NTN
Product performance
Dynamic load, C 34.5 kN
Rating life coefficient, A2 1.4
Static load, C0 41 kN
Fatigue limit load, Cu 5 kN
Nlim (oil) 8,400 Tr/min
Nlim (grease) 6,300 Tr/min
Min operating temperature, Tmin -40 °C
Max operating temperature, Tmax 120 °C
Characteristic cage frequency, FTF 0.43 Hz
Characteristic rolling element frequency, BSF 7.2 Hz
Characteristic outer ring frequency, BPF0 8.25 Hz
Characteristic inner ring frequency, BPFI 10.75 Hz
Abutment dimensions
ra max 3.94 mm
r1a max 1.3 mm
